(888) 228-7435

Dodge Viper GTS Header Back Exhaust System without Cats (Oval Tips) #FVIP-0120


Product Details

Dodge Viper GTS Header Back Exhaust System without Cats (Oval Tips) #FVIP-0120
  • 4 1/2″ Twin OVAL Tips.
  • Mandrel bent from the highest-grade T-304 stainless steel.
  • Designed, tested, and manufactured to the finest hand-made integrity found in any exhaust system.
  • Limited Lifetime Warranty
product image

product imageproduct imageproduct imageproduct image


Lifetime Warranty

Have more questions? Contact us!

The Magnuson-Moss Warranty Act makes it illegal for companies to void your warranty or deny coverage under the warranty simply because you used an aftermarket part. READ MORE…

product image WARNING: This product in the physical form it is sold does not present a hazard. However, operations including, but not limited to welding, brazing, or thermal cutting can expose you to chemicals including Chromium, Nickel, Cobalt, Arsenic, Cadmium and Lead which are known to the State Of California to cause cancer, birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov

Download PDF here… FVIP0120


Installation of Billy Boat’s high-performance stainless steel headers for the VIPER V-10 is simple and straightforward. These headers do not require any cutting, welding, fabrication or other modifications to install. A professional can install the Billy Boat Exhaust headers using regular hand tools in 3-hours time. It is recommended a shop manual be referred to for removal and installation specifications.

Below are some tips to help you through the installation. If you require further assistance, please call our toll-free tech line at 888-228-7435.


  1. Disconnect the battery negative terminal.
  2. Remove the primary O2 sensor from the collector of each exhaust manifold.
  3. Unbolt the bottom (collector) of the exhaust manifold at the exhaust flange. This needs to be done from the underside of the car. Remove the clamp that connects the header to the cat system.
  4. Unbolt the top of the exhaust manifold from the cylinder head and carefully remove the exhaust manifold from the engine compartment.



  1. Apply anti-seize to all threaded components such as O2 sensors, bolts, etc.
  2. Apply a small dab of glue to the supplied primary gaskets and glue them to the headers.
  3. Slip each header tube into place (one at a time from the top of the engine compartment) and loosely tighten the primary flange bolts.
  4. Align the header tubes and slip the collector onto the tubes. (Note: if using the existing or other supplied cat back system, then the supplied turn out tubes will have to be fitted to the Billy Boat Exhaust headers). Use the supplied clamp to clamp the collector to the exhaust system.
  5. Install the factory O2 sensor and sensor wire.
  6. Reconnect the battery.



  1. Start the engine and carefully listen for any exhaust leaks. If a leak is detected be sure the hardware is tightened evenly across the flange and that the gasket is properly seated.
  2. Drive the car spiritedly and listen for any rattles or leaks. Let it cool down and install cosmetic plastic.
  3. After 500 miles are logged re-torque all of your work.

Billy Boat Exhaust Safety, Installation and Liability Statements

SAFETY: Appropriate disassembly, assembly methods and procedures are essential to ensure the personal safety of the individual performing the kit installation. Improper installation due to the failure to correctly follow these instructions could cause personal injury or death. Read each step of the installation manual carefully before starting the installation.

  • Always wear safety glasses for eye protection.
  • Place the ignition switch in the OFF position.
  • Always apply the parking brake when working on the vehicle.
  • Block the front and rear tire surfaces to prevent unexpected vehicle movement.
  • Operate the engine only in well-ventilated areas to avoid exposure to carbon monoxide.
  • Do not smoke or use flammable items near or around the fuel system.
  • Use chemicals and cleaners only in well-ventilated areas.
  • Batteries can produce explosive hydrogen gas which can cause personal injury. Do not allow flames, sparks or flammable sources to come near the battery.
  • Keep hands and any other objects away from the radiator fan blades.
  • Keep yourself and your clothing away from moving parts when the engine is running.
  • Do not wear loose clothing or jewelry that can be caught in rotating or moving parts.

VEHICLE SUPPORT WARNING: Should the purchaser decide to install this exhaust product at home, be warned that car or light duty truck/van “bumper” jacks are intended for emergency use only. The use of frame contact jack stands in conjunction with a floor jack as main support is highly recommended to minimize accidental dropping of a vehicle while the installation proceeds. We recommend the use of a shop hoist if possible. Please use caution!

GENERAL STATEMENT OF LIABILITY: While we provide information for do-it-yourself installation of exhaust systems and related items, these operations are not without risk. Injury may occur during an installation or exhaust systems and their components may be damaged in the process. We are not responsible or liable for damages that may be sustained to persons or property during an installation. For this reason, we recommend professional installation as the best option when at all possible. While care has been taken in the preparation of the information contained in this web site, Billy Boat Exhaust and BillyBoatExhaust.com does not and cannot guarantee its accuracy. Anyone accessing this information does so at their own risk. It will be assumed that access indemnifies Billy Boat Exhaust and BillyBoatExhaust.com from any and all injury or damage arising from such use.

LOCAL LAWS & LIMITATION OF LIABILITY/DISCLAIMERS: Local Laws & Limitation of Liability/Disclaimers: The regulation of emissions production, noise levels and safety standards is undertaken by the federal government, each of the fifty state legislatures, and by many local municipalities, towns and counties. The manufacturer makes no warranties of merchantability, of fitness for a particular purpose, or that its products are approved for general use, or that its products comply with laws, regulations or ordinances in the states where they may be sold to the ultimate purchaser, the consumer. The entire risk as to the conformity of this product in any such state and as to repair, should the product prove to be defective or non-conforming, is on the retail purchaser, the buyer, the ultimate consumer of such product and it is not upon the seller, distributor, or manufacturer. In this connection, retail purchaser, the buyer, the ultimate consumer assumes the burden of the entire cost of any and all necessary service, alterations, and or repair. The foregoing statement limits the liability of the manufacturer.

If you have any questions please feel free to give us a call. Our direct line to the sales departments is 1-888-228-7435, ext 18. We are in Phoenix, AZ and can be reached 8am-5pm. Should you have questions that images would help explain, please email Mike at mike@bbexhaust.com.

*Please note, we do not follow daylight savings time if you are contacting us outside of Arizona.

We try to put as much information as possible within our product pages to help with application choice and the installation process. The business you purchased our product from can be a wealth of information, but should you need additional help and information, please feel free to call or our sales department.

Monday-Friday 8:30am-5:00pm Arizona time.
888-228-7435 x18 or 623-581-7600 x18

*Note that Arizona does not follow Daylight Savings Time.

More information in additional browser tab.

Newsletter Sign Up