C6 Total Performance

Billy Boat Performance Exhaust, the manufacturer of complete automotive exhaust assemblies, is the worlds' source for C6 Corvette Total Performance Packages.

Total Performance begins with Route 66 or the new PRT Mufflers, or the most aggressive performance exhaust to be released, the Bullet. It is complete by adding a pair of Hi Flow Air Filters to the C6, providing a level of protection without sacrificing air flow.

Get all of Stage 1 plus Long Tube Headers and a synchronized crossover pipe with Hi Flow Catalytic Converters. Crossover pipes are available with Resonators or Standard for unrestricted flow and optimized sound.

Bullet Exhaust System

The Bullet is the most aggressive performance exhaust system to be released, and has quickly become the industry standard for a deep, aggressive muscle car sound. Your C6 can see performance gains of up to 18 rear wheel horse power and 17 foot pounds of torque from the Bullet.

If you want to tone your Bullet down just a little bit, a great options is the PRT x-pipe section with resonators. This will help to smooth out the exhaust pulses and take the edge off the Bullet while maintaining that aggressive tone.

PRT - The NO-DRONE Exhaust System

The Billy Boat Performance Exhaust PRT C6 exhaust system is the latest in resonance control technology from B&B. Completey redesigned and reengineered for the C6, the system is simple in design, though more complex in theory. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets.

And because we've been so closely related with Corvette excellence, we aim to show our appreciation by putting our absolute best into every hand-made--never outsourced, always in the United States!--stainless-steel C6 system that we make.

We like to look at our C6 PRTs as the epitome of a Billy Boat exhaust system. In fact, they're built to exceed even the finely-tuned, highly-discriminatory, work-hard/play-hard expectations of your typical Corvette owner.

We sought your feedback through the Corvette car clubs, corvette enthusiasts, shows across the Country, PMing back and forth with no-nonense forum leaders, and tapping in to our vast racing network.

And the fact that the B&B PRT C6 exhausts do NOT have that unpleasant DRONE was the most popular aspect of our Purge Resonance Technology. This was usually qualified with an appreciation of how you (or whoever's driving, really) have so much control over your C6 exhaust system, both in sound and in the correlating performance and driving experience.

The PRT comes complete with a true straight-through exhaust passage under agressive driving conditions, though a mellow sound is emitted at cruising speeds thanks to the unique Purge Chamber.

This Billy Boat Performance Exhaust PRT system works purely on physics and adrenaline.

Gains of up to 18 rear wheel horse power and increases of 17 foot pounds of torque from the PRT.

If you want to tone your PRT down just a little bit, a great options is the x-pipe section with resonators.

This will help to smooth out the exhaust pulses and take the edge off the PRT while maintaining that aggressive tone.

Route 66 Exhaust System

The Route 66 system has a very distinctive muscle car idle note that emits a true touring performance sound on the highway and will garner an additional 11 rear wheel horsepower on your C6. Options for the Route 66 include an x-pipe (FCOR-0430) or the center muffler (FCOR-0440). It is recommended that customers with a C6 automatic or paddle shift transmission use the new PRT exhaust system, as it has shown to be the best choice for those cars.

Route 66 Exhaust System  

C6 Long Tube Headers / X-Pipes

Billy Boat Performance Exhaust has once again taken the Pole Position in the market by developing long tube header systems specifically for the C6 Corvette. The header design incorporates the correct firing sequence which pairs exhaust ports together for more efficient exhaust scavenging. Dyno testing, utilizing technology previously found in racing applications has shown an increase of horsepower and torque throughout the entire RPM range. This is a true bolt-on header, complete with hardware and gaskets, dedicated to the C6 Corvette. The new 1.75" tube flows seamlessly to a 3", 4-into-1 collector. Billy Boat Performance Exhaust also makes a variety of x-pipes for the c6 Corvette.

The x-pipe section evens the exhaust pulses with a sycronized crossover in the center section, resulting in a deeper, smoother tone.